Teledyne LeCroy Test Services (TLTS) has developed a torque testing tool for CV shafts. The AT100 Torque Sensing System is designed for long term in-vehicle or dynamometer testing. No slip rings or outboard wiring are required.
The AT100 is entirely weatherproof making it an excellent choice for fleet testing. The AT100 uses non-contact, digital data transfer technology providing the user with a clean and responsive signal.
Power is inductively supplied to the rotating collar eliminating the need for batteries. The AT100 is truly a “hands off” torque measurement system, as once installed, it is invisible to the user.
TTS offers this exciting product as a turnkey installation onto the customer’s CV shaft.
|AT100 Rotating Electronics (Collar)|
|Torque capacity:||Dependent on shaft size, typically +/-2500 ft-lbs|
|Calibration range:||0-6000 ft-lbs (8100 Nm)|
|Operating temperature range:||-40 to +85C, -40 to +120C optional|
|Physical size:||2.2” OD x 2.5“ W|
|Environmental concerns:||Completely weatherproof sealed housing/bearings|
|Maximum speed:||5500 RPM (consult factory for higher speeds)|
|AT100 Stationary Electronics|
|Combined accuracy:||0.5% FS NIST Traceable|
|Interface to Collar:||Serial Digital|
|Output signal:||0+/-5, 0+/-10 V (scalable)|
|System frequency response:||2, 20, 200 or 2000 Hz (-3dB, user selectable)|
|Input power requirements:||9 to 18 VDC, 0.8 amp (1.8 amp startup surge)|
|Operating temperature range:||0 to +50C|
|Physical size:||7.5” W x 7.5” D x 2.0” H|